Proportional Valve

The German Rexroth fully closed-loop electro-hydraulic servo high-frequency synchronous control system is adopted to ensure that the machine tool has high stability and high precision in the process of high-speed operation. Advantage:

• The frequency response (response frequency) is higher and can be as high as 200Hz.
• It can continuously and proportionally control the pressure and flow of the hydraulic system, control the position, speed, and force, and reduce the impact of pressure changes
• Closed-loop control, signal feedback.
• Original German imported products, longer service life.

Italy DSP Laser Protection

DSP® laser protection will be necessary if you have a high requirement for the safety. Advantage:

• Laser protection, Multi beam Receiver
• Pretective areas, Front, center and rear
• The safety level is CAT.4 and SIL3
• Detection Case protection degree: IP 65
• Laser classification: class 1 M
• Response time: 5 ms
• Change Speed Point : 5mm + Stopping Space
• The maximum protective distance is up to 15M
• LED indicators show various states

Press Brake 6-Axis CNC BackGauge With X1, X2, R1, R2, Z1, Z2-Axis

• Ball screws and linear guide on X, R-axis
• Precision belts and YYC rack on axes Z1‐Z2
• Fingers with double stop and micrometric adjustment
• Mechanical accuracy ± 0.03 mm
• Axes R1‐R2 speed 500 mm/s
• Axes X1‐X2 speed 600 mm/s. (1000 mm/s optional)
• Axes Z1‐Z2 speed 1100 mm/s

Press Brake 5-Axis CNC BackGauge With X, R, Z1, Z2, Prime (Delta) X-Axis

• Ball screws and linear guide on X, R-axis
• Precision belts and YYC rack on axes Z1‐Z2
• Fingers with double stop and micrometric adjustment
• Mechanical accuracy ± 0.03 mm
• Axes Z1‐Z2 speed 1000 mm/s
• Axis X speed 500 mm/s
• Axis Delta X speed 500 mm/s

Bending Follower Features

• AP1 - AP2 CNC-controlled interpolated axes
• Light solution, easy to move
• Adjustable according to the size of the workpiece
• Improved shop floor efficiency
• Less physical strain and safety risks
• Protection from counterbends and scratches
• Bend as closed as 70°
• R axis -30/+170 mm; maximum die opening 100 to 160 mm

Laser Check Angle Measurement System

The iMeasure are fully-automatic laser-assisted bend angle measurement systems for CNC press brakes. Irrespective of the properties or thickness of the material, the LaserCheck enables an exact determination of the bending angle with an accuracy of better than 0.1°. This represents precision which has never been available before.

• A laser beam is projected on the sheet metal surface
• The camera detects the laser beam
• The angle between the beam and the camera axis determines the bend angle
• Force reduction + calculation of the springback
• Automatic angle correction

Front Sheet Follower Supports System

The hydraulic press brakes with Sheet supports follower system for bending long and thin sheets,It basically consists of a pair of sheet supports placed on the front of the machine at the height of the bending line (bottom tool). Supports are controlled by the CNC, following and supporting the sheet during the bending process.

• Automatic bending follower supports
• AP1 - AP2 CNC-controlled interpolated axes
• Ecommended for heavy parts or large thin plate
• Bend as closed as 70°
• Load capacity – 180 kg per support
• Brush and support shaft dim 350x900 up to 1200 mm